- The wireless UHF M2T Stereo Transmitter provides a choice of 100 selectable frequencies and is equipped with two XLR/¼” combo input connectors into which users can connect line-level inputs. While up to 10 complete M2 systems may be used on stage simultaneously, any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses. Frequency Band L: 575.000 to 608.000 MHz, 100 frequencies. Features: High-fidelity sound with clean, articulate mix allows you to hear yourself better at lower volume 100 selectable UHF channels Up to 10 simultaneous systems per frequency band Three receiver modes: Personal Mix, stereo, and mono Personal Mix Control allows volume and mix control of two independent signals at the receiver 3.5 mm line-in jack connects to ambient microphone, click track & more LED indicators provide easy-to-read level monitoring XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation Adjustable squelch eliminates annoying static Pilot tone protects against RF interference when the transmitter is turned off Limiter (defeatable) helps protect your hearing from sudden peaks Portable system is quick to load and set up Reduces on-stage audio clutter for better overall mix & less feedback Use any number of M2R Stereo Receivers (with Personal Mix Control) on the same frequency Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation Personal fit with 3 sizes of rubber ear tips plus ear-conforming foam tips Auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input. Specifications: Band L: 575.000 to 608.000 MHz, 100 frequencies RF Power Output: 10 mW/30 mW (switchable internally), 50 ohms, Limited to 10 mW within 863 MHz to 865 MHz Spurious Emissions: Following federal and national regulations Input Connections: XLRF-type/6.3 mm stereo (1/4') combination connector. Pin 1 and Sleeve: Ground, Pin 2 and Tip: Hot, Pin 3 and Ring: Cold Maximum Input Level: XLRF-type/6.3 mm stereo, (1/4') balanced: +26 dBu, 6.3 mm (1/4') mono, unbalanced: +26 dBu Loop Output Connector: XLRM-type connector. Pin 1: Ground, Pin 2: Hot, Pin 3: Cold Power Requirement: 12-18V DC, 600 mA Antenna: Attached whip Dimensions: 210.0 mm (8.30') W x 132.0 mm (5.20') D x 44.0 mm (1.70') H Net Weight: 870 g (30.7 oz), without accessories Accessories Included: AC adapter (country dependant); rack mount adapters

상품 상세 정보

The wireless UHF M2T Stereo Transmitter provides a choice of 100 selectable frequencies and is equipped with two XLR/¼” combo input connectors into which users can connect line-level inputs. While up to 10 complete M2 systems may be used on stage simultaneously, any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses. Frequency Band L: 575.000 to 608.000 MHz, 100 frequencies. Features: High-fidelity sound with clean, articulate mix allows you to hear yourself better at lower volume 100 selectable UHF channels Up to 10 simultaneous systems per frequency band Three receiver modes: Personal Mix, stereo, and mono Personal Mix Control allows volume and mix control of two independent signals at the receiver 3.5 mm line-in jack connects to ambient microphone, click track & more LED indicators provide easy-to-read level monitoring XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation Adjustable squelch eliminates annoying static Pilot tone protects against RF interference when the transmitter is turned off Limiter (defeatable) helps protect your hearing from sudden peaks Portable system is quick to load and set up Reduces on-stage audio clutter for better overall mix & less feedback Use any number of M2R Stereo Receivers (with Personal Mix Control) on the same frequency Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation Personal fit with 3 sizes of rubber ear tips plus ear-conforming foam tips Auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input. Specifications: Band L: 575.000 to 608.000 MHz, 100 frequencies RF Power Output: 10 mW/30 mW (switchable internally), 50 ohms, Limited to 10 mW within 863 MHz to 865 MHz Spurious Emissions: Following federal and national regulations Input Connections: XLRF-type/6.3 mm stereo (1/4') combination connector. Pin 1 and Sleeve: Ground, Pin 2 and Tip: Hot, Pin 3 and Ring: Cold Maximum Input Level: XLRF-type/6.3 mm stereo, (1/4') balanced: +26 dBu, 6.3 mm (1/4') mono, unbalanced: +26 dBu Loop Output Connector: XLRM-type connector. Pin 1: Ground, Pin 2: Hot, Pin 3: Cold Power Requirement: 12-18V DC, 600 mA Antenna: Attached whip Dimensions: 210.0 mm (8.30') W x 132.0 mm (5.20') D x 44.0 mm (1.70') H Net Weight: 870 g (30.7 oz), without accessories Accessories Included: AC adapter (country dependant); rack mount adapters



ASIN : B008MOCNNI
PROD번호 : 690022582
정보업데이트 : CV.38731 : 2020-08-25 오후 4:26:50